Request a quote
Additives
Download
Variability in Fumed Silica Powders

A robust method of quantifying the effect of different grades of fumed silica and the influence that has on performance in a manufacturing operation enables a design space of acceptable properties for raw materials and blends to be established.

Additives
Download
流动添加剂对粉体行为的影响 (The Influence of Flow Additives on Powder Behaviour)

许多粉体的基本流动属性很差，会在料斗和冲模送料结构中堵塞，造成不均匀或间歇式的卸料速率、粘附在设备表面，无法与其它材料充分混合。

Additives
Download
Der Einfluss von Fliessadditiven auf das pulververhalten (The Influence of Flow Additives on Powder Behaviour)

Viele Pulver haben schlechte Fließeigenschaften: Sie verstopfen in Trichtern und Düsenrahmen, weisen ungleichmäßige oder pulsierende Durchflussraten auf, haften an Geräteoberflächen oder vermischen sich nicht leicht mit anderen Materialien. In solchen Fällen ist es möglich, die Reibung zwischen den Partikeln zu reduzieren und den Schüttgutwiderstand des Pulvers durch Zugabe eines Gleitadditivpulvers zu verändern.

Additives
Download
流動添加剤が粉体挙動に与える影響 (The Influence of Flow Additives on Powder Behaviour)

多くの粉体は基本的な流動特性が低く、ホッパーやダイフィードフレーム内での詰まりや一貫性のない流れを引き起こし、不均一な排出速度が見られたり装置表面への付着が見られます。また、他の物質とは容易には混合できません。

Additives
Download
Evaluating Flow Aid Distribution using Magnetically Assisted Impaction Coating

This study compares the flow properties of a substrate, when blended with a flow aid using MAIC or a V-blender. The resulting blends were tested using an FT4 Powder Rheometer to evaluate their rheological properties. The study also investigates the effect of flow aid concentration on samples blended using MAIC.

Additives
Download
The Influence of Flow Additives on Powder Behaviour

Over a range of processes the relationship between flow additive and substrate is less well-understood. Due to the differing demands placed on powders by different processes, the relative influence of a given additive on a given substrate may not be consistent under all circumstances.

Additives
Download
Flowability of Powders and the Effects of Flow Additives

A study of how the bulk and flow properties of potato starch and corn starch are affected by small amounts of fumed silica flow additive (AEROSIL® 200). A powder rheometer was used to measure dynamic flow properties as well as shear properties, including their yield loci when pre-consolidated and their shear strength (cohesion) at near zero consolidation stress.

Categories

All Additive Manufacturing Additives Battery Catalyst Cement Chemical Ceramic Coatings Cosmetics Food General Metals Pharmaceutical Toner